link to Spies Hecker.com
Contact Us Site Map Help Home
In this Section
Knowledge Base
Colour Formulations
Training
Support Programmes
Business Tools
Useful Links
Knowledge Base
 
 
 
Cratering in the surfacer
Definition
Crater-like indentations with raised edges.
 
Cause
Substrate was not thoroughly cleaned with silicone remover.
Air supply was contaminated with oil or water (defective oil and water separator in air line).
 
Prevention
Thoroughly clean the substrate with silicone remover.
Ensure that regular maintenance is carried out on the compressed air lines.
 
Remedy
Allow to dry and then sand out the craters.
Clean the whole surface and apply another coat of surfacer.
 
Terms of use & Legal entity Privacy Statement SpiesHecker.com