Hot on the heels of the introduction of Spies Hecker’s Priomat® 1K Wash Primer 4085, the company has announced the addition of a useful aerosol variant to the range.

Priomat® Wash Primer is an extremely good, general use product for a wide range of applications. As a quality primer it has excellent gloss and flow, outstanding corrosion protection and is re-coatable with all 2K acrylic surfacers and top coat systems from the Spies Hecker range, including waterborne basecoat.

The light grey shade of the product produces better coverage and wet-on-wet application is no problem. Low product usage is the result of the exceptional yield of these primers.

The aerosol version is a welcome addition to the product line-up as a fast, easy to apply option for small repairs and sandthroughs. And, of course, there is no time consuming and costly wash up time required.

Flash off times are impressive at 10 – 15 minutes as an etch primer and 30 – 60 minutes as a primer filler, as is IR drying of 5 minutes at 50% power.

As part of the Spies Hecker Greentec Line of ecologically sensitive products, Priomat Wash Primer 4085 is in line with VOC ceilings and, at approximately 710g/l, is well below the 780g/l limit. Environmental advantages are further enhanced in the aerosol product with its lower material usage and minimal wastage.

For more information call Spies Hecker on (02) 8818 4330 or contact your local Spies Hecker Distributor.